ProfiDrum Connect Control Box

The ProfiDrum Connect Box is designed using the “Plug and Play” principle to prevent additional wiring. It is equipped with market-standard sockets and does not require any specific tooling for connecting.

The control unit itself is equipped with a “Power On/Off” switch, push buttons that are equipped with LED light to communicate the base status of your system. These buttons are labelled Automatic, Stop/Reset and Manual and reside on the front of your control unit.

Under normal running the green light will be on Automatic, however you can push the manual button and it will automatically do a manual clean and then by default back on to Automatic.

The ProfiDrum Connect Control Box comes “plug and play” ready when you buy a ProfiDrum Drum filter. We also have it as a spare part if you need a replacement in years to come. 

The ProfiDrum Connect Control Box comes with 3 sockets and plugs, one for the High Pressure Pump, one for the Gearbox Motor and a third for the main pond pump. We advise for the UV and air pump to be plugged in to a separate main socket.

The ProfiDrum Connect Control Box comes complete with Low Level protection relays with in the box as standard, The low level switch, probes and brackets can be bought separately if needed.

When buying the ProfiDrum complete drum filter, your control box will come with two probes. The installation position of the Probes will be determined by your set-up, either pump or gravity Fed. This can be set by a switch within the control box.

How many seconds the cleaning comes on for can be adjusted inside the box, also how long the low level protection time can also be determined from within the box.

ProfiDrum Connect Control Box 

1. Comes with 3 x two pin plugs
2. Probes to be bought separately if needed
3. Low level Switch to be bought separately if needed
4. Brackets for both probes and low level switch to be bought separately if needed.